Full over queen bunk bed, Insert the barrel nuts provided with your full over queen bunk bed in the mounting holes on both ends of each side rail. Tighten head against the wall and secure the side rails by inserting two of the screws supplied through the head and lanes on either side.
Tighten bolts with an Allen wrench.
Connect the other end of the rails to the bracket by inserting two screws through the holes on each side of the stage and in the lane, and tighten with the Allen key. Align the center bracket on the bed frame so full of mounting holes are aligned with the center of the header and footer. Insert two screws through the top of the double bed and the rails and tighten. Insert two screws through the bracket and into the rails at the opposite end, and tighten. Install handrails on both sides of the double bed if they are provided with your full over queen bunk bed. Install kits tablets provided with your full over queen bunk bed and complete individual frames together, and secure each with wood screws supplied.
12 Photos Gallery of: Full Over Queen Bunk Bed
Lift the double bed in the bed and align the pins with the holes in the bottom of the leg and foot header. Make sure all the screws are tightened to the frame of the full over queen bunk bed does not move or wobble, and install the mattresses.